NORTE Cantos provides one of the largest veneer edgebanding selections of the market.

We offer a wide range of European, American and African species, as well as many reconstituted veneer references. There are different finishing processes that allow us to satisfying any customer needs quickly and efficiently.

All wood thickness that we can provide is standard for all the veneer edges, going from 0,5 mm to 3 mm

Thickness: around 0.50 mm

Available products:

  • Rolls: Width from 14 mm to 70 mm and natural length 250 ml
  • Master rolls: used for wrapping frames and wooden moulding. Width from 71mm to 320 mm and natural length 125-250 ml. It could have fixed splicing.
  • Cross grain: This product can be ready as rolls or master rolls, having always supporting frame and being sanded.
  • Veneer strips: as well as the master rolls, it is used for wrapping frames and wooden moulding. Width from 70 to 320 mm, having variable lengths.

Finishing:

  • Glue
  • Supporting frame
  • Sanded, calibrated
  • Sanded/Bottom
  • Sanded/ pre-lacquered and sanded
  • Clear varnish
  • Colour varnish

This edgebanding is obtained by a careful pressing process of different veneer layers, according to the needed thickness.

Standard thickness goes from 1 mm to 3mm.

Available products:

  • Rolls: Width from 14 mm to 70 mm and natural length between 100 m-200m, depending on the thickness.
  • Master rolls: Width from 71mm to 320 mm and natural length 100m-200ml, depending on the thickness.
  • Cross grain: This product can be ready as rolls or master rolls, being sanded.
  • Veneer strips: Width from 70 to 320 mm, having variable lengths.

Finishing:

  • Glue
  • Sanded
  • Sanded/Bottom
  • Sanded/ pre-lacquered and sanded
  • Clear varnish
  • Prymer

This product is provided with a pre-lacquered and sanded process

  • Thickness: 0.5 and 1 mm
  • Width: from 14 mm to 200 mm
  • Rolls length: 250 ml (0,4 mm) and 200 m (1mm)
ASK FOR FINISHING SAMPLES